Decorate your car at home using the sprayer

Some young people try to add more modernity to their cars by decorating them with a puffer, some people may see that this is difficult, and they may be somewhat right, but we have to admit that this is not impossible as some people think, but it needs some time and implementation well It needs special attention to detail, in order to obtain a series of layers free of impurities, and the implementation requires a high degree of accuracy in order to avoid any mistake that may have to work from the beginning again, so the accuracy is taken into account in order to obtain a distinctive car worthy of presentation, Today is our time to learn how to paint and decorate the car.

We will explain in this video the steps to color and decorate the car in a simplified manner and in a professional manner through the use of the sprayer, as we will mention some instructions that protect you from making mistakes and that would corrupt the car's external appearance.

An important instruction that protects you from making mistakes when decorating the car is that it covers the places you want to decorate, which facilitates the process of painting and in the event that the car is divided into several parts, you should not forget to put the paint paper on the surfaces that you do not want to paint at the present time, and is done Fastened with adhesive tape.

First the surface must be established with a polyester layer, and the car is coated with about three or four layers by using a traditional paint brush, until a solid layer is built on the surface of the car, and then a black lacquer layer is sprayed to cover the entire base layer, and is left to dry overnight.

*STEP 01: Choose a suitable place to work. You will need a well-ventilated, slightly dusty, well-lit place with electrical current and space to move around the car.

*STEP 02: Gather the materials and tools you'll need, but here are some general things: Paint tools, paint, Sanding and polishing tools,Protection tools.

*STEP 03 :Remove dirt and repair any dents that you do not want to appear after you've finished painting.

*STEP 04 : Remove any plastic attachments, especially those that can be removed and reposition later. Like a car searchlight frame. Most plastic accessories can be extracted and reinstalled, but if your attempt to gently grab them does not work, do not attempt to remove them badly.

*STEP 05 : Paint emery to reveal the metal or paint liner (the preparatory layer of paint) to make the new paint hold together.

*STEP 06 : Clean the surface of the car with alcohol to ensure there are no oils.

*STEP 07 : Use duct tape and paper to cover unpainted surfaces, such as: glass, window frames, mirrors, and door handles.

*STEP 08 : If you have removed all of the paint until the metal appears, apply a layer of abrasion-resistant paint liner.

*STEP 09 : Let the paint liner to dry well. Check the information on the bowl.

*STEP 10 : Sand the surfaces after applying the paint liner. Use a 600 "sanding sheet.

*STEP 11 : Clean the surfaces after applying the paint liner to remove any rust or oils accumulated while applying the liner.

*STEP 12 : Sprinkle the final paint layer onto the car. Prepare the paint to spray according to the manufacturer's instructions.Ensure that the paint is diluted properly and properly with the tool you are using.

*STEP 13 : The paint should be allowed to dry completely. The paint should dry in less than 24 hours if the catalyst is used and completely dehydrated within 7 days.

*STEP 14 : Scratch the car permanently. Use very fine sanding paper. You can apply a transparent paint layer if you want to give the car a shiny look.

*STEP 15 : Use alcohol to polish the paint and add shine to it. It is best to do this step with your hand, but you can do it with a polishing machine that can do this process more easily.